K keebler Member Joined Apr 29, 2013 Messages 5 Reaction score 0 Apr 30, 2013 #1 have been lurking around want to stat on my jon, a lot of nice boats on here....so anyways about ready to buy material i am just wondering what size aluminum i be using to frame? also tube or angle? thanks and i appreciate all the help
have been lurking around want to stat on my jon, a lot of nice boats on here....so anyways about ready to buy material i am just wondering what size aluminum i be using to frame? also tube or angle? thanks and i appreciate all the help
bigwave Well-known member Joined Jan 18, 2012 Messages 1,577 Reaction score 0 Location St. Petersburg, Fl Apr 30, 2013 #2 I used tube, easy to work with just get a mason blade for the grinder to cut it. Use eyeware too.
K keebler Member Joined Apr 29, 2013 Messages 5 Reaction score 0 Apr 30, 2013 #3 1 in tubing? and thanks for the help
bigwave Well-known member Joined Jan 18, 2012 Messages 1,577 Reaction score 0 Location St. Petersburg, Fl Apr 30, 2013 #4 Yes 1" square, I would recommend looking for a metal recycle place. They have much better deals than the box stores.
Yes 1" square, I would recommend looking for a metal recycle place. They have much better deals than the box stores.
K keebler Member Joined Apr 29, 2013 Messages 5 Reaction score 0 Apr 30, 2013 #5 what thickness for floor .63 or.8 ok. smaller guy around 135lbs...1/8 on tubing also???
K keebler Member Joined Apr 29, 2013 Messages 5 Reaction score 0 May 2, 2013 #6 is everyone making their own aluminum brackets out of L angle to rivet their framing?
K keebler Member Joined Apr 29, 2013 Messages 5 Reaction score 0 May 2, 2013 #7 i will get a picture of the jon up tomorrow