richg99
Well-known member
#1. This morning, I bought a 3/4 inch Galvanized 36 inch long pipe. Added a Pipe flange and a galvanized 5/16ths square U bolt. Slipped a piece of PVC over the top and finished it with a galvanized cap. This handle should help me get my old body over the bow and onto my trailer when recovering the boat.
#2. I've also had issues trying to drive my boat up on the trailer exactly far enough to easily crank her on. Sometimes, I would be too short, and other times too far. I added two pieces of electrical tape in line with my trailer riser.
Now, by glancing down when I am on the console, I know whether or not I am properly positioned without hanging over the bow to check.
regards, richg99