Hi all, I’m restoring this old tinny and are undecided on what to do with the stainless storage insert on the bow. If I paint it the same as the rest of the boat, it’ll invariably end up chipped. I’ve been considering lining it with thin rubber but as it’ll be stored out in the weather, I’m assuming the rubber will quickly perish or lift. Other thoughts were to leave it bare and perhaps a small piece of rubber in the bottom, or thin marine carpet all round.
It has a drainage hole in the corner and will store rope, a small length of chain and small anchor
Sent from my iPhone using Tapatalk
It has a drainage hole in the corner and will store rope, a small length of chain and small anchor
Sent from my iPhone using Tapatalk