TinBoats.net
The original aluminum boat site!
carb model number on evinrude 18 fastwin
- Thread starter ecb223
- Start date
Help Support TinBoats.net:
BaitCaster
Well-known member
You should be able to find a parts catalogue at www.marineengine.com
- Joined
- May 15, 2010
- Messages
- 3,708
- Reaction score
- 393
- Location
- Central Florida
- LOCATION
- Lake County, Central Florida
What are you looking to do once you find out?
If it is just a carb kit you don't need that much information as a kit for that carb will cover several carbs and several years of engines.
If it is just a carb kit you don't need that much information as a kit for that carb will cover several carbs and several years of engines.
Well thats the thing, I was trying to order a carb kit ,but they all stop at 1968 and I have a 1966. I was just making sure that there wasnt something different on mine.
I took the carb apart and cleaned it out and put it back together with the old gasket because it looks like it is rubber.
Everything was clean inside and I didnt see much wrong except the float was off a little bit .but not much.
I had a little trouble prior to doing this. She ran fine for about 20 minutes and then it just started bogging down and had verry little power. I checked the cap on the fuel tank and it was open,I shited it in neutral and she revved up and iddled fine,but I put it back in gear and the same thing happened. I just assumed it was the carb. Any thoughts?
I took the carb apart and cleaned it out and put it back together with the old gasket because it looks like it is rubber.
Everything was clean inside and I didnt see much wrong except the float was off a little bit .but not much.
I had a little trouble prior to doing this. She ran fine for about 20 minutes and then it just started bogging down and had verry little power. I checked the cap on the fuel tank and it was open,I shited it in neutral and she revved up and iddled fine,but I put it back in gear and the same thing happened. I just assumed it was the carb. Any thoughts?
- Joined
- May 15, 2010
- Messages
- 3,708
- Reaction score
- 393
- Location
- Central Florida
- LOCATION
- Lake County, Central Florida
You can still get the correct carb kit at any Johnson or Evinrude dealer.
Your symptoms are broad in description at the very least. Try pumping the bulb when the issue occurs. If that helps you may have a fuel pump issue or still have a dirty carb. If the power comes and goes suddenly you may have an ignition issue on one cylinder.
Your symptoms are broad in description at the very least. Try pumping the bulb when the issue occurs. If that helps you may have a fuel pump issue or still have a dirty carb. If the power comes and goes suddenly you may have an ignition issue on one cylinder.
Well yesterday I ran her in a barrel of water and she ran fine. I guess I'll see what she'll do at the lake. I guess if it does it again I'll pull one spark plug wire off and she if it runs any different, then try the other. It might be ignition because the bottom spark plug is quit a bit cleaner than the top one.
