- Joined
- Feb 18, 2009
- Messages
- 2,396
- Reaction score
- 2,261
- Location
- Perrysburg Ohio
- LOCATION
- Perrysburg Ohio
If you don't have ptt, then some type of support is needed that is fixed and place and can't slip or fall out. On my small manual tilt motors I usually built a wood wedge to keep them tilted up with some type of strap or even a bungee cord to keep the device in position. Follow a boat over a rough set of RR tracks and watch the motor flop up and down....that is what you need to stop from happening !!