Good Baitcaster Starter

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

one100grand

Well-known member
Joined
Oct 11, 2010
Messages
624
Reaction score
0
Location
Alexandria, VA
I've been fishing for a long time and learned with spincasting, then transitioned to spinning and tried baitcasting probably about 10 years ago, but really didn't know what I was doing. I fish mostly for Largemouth/Smallmouth Bass and occasionally I'll use this for Stripers as they run, but that's pretty much it.

I've always used a lot of hard baits & spinners and have rarely used any soft plastics or bass jigs - but that's about to change. In order to become a more well rounded fisherman and more capable of catching fish in any situation, I've started getting more into soft plastics (I haven't yet started on jigs) and I decided that I wanted to try baitcasting again so I'm turning to the expert advice of the forums.

I have a budget of between $50-70 for this reel or combo and I need something that's a lefty retrieve. I was lucky enough to buy a Cabella's IM7 off a guy for $5 from Craigslist so I don't really need the pole, but I've sort of already promised that one to my wife (she'd be willing to accept a substitute -i.e. combo pole if I decide to take it).

Please make suggestions on what would be a good starter in this range.
 
bearsphan3.14 said:
check this thread out
https://www.tinboats.net/forum/viewtopic.php?f=7&t=15532

Thanks!

I'm more in the market for a reel though since I've already got the pole pretty much set (it just means I have to buy my wife a new pole).
 
If you have an academy near you the H2O mettle is $50 and hard to beat. I have two and know many people who use them and think they are as good as the shimano's and revo's that cost twice as much. Academy has an awesome return policy as well.
 
Ok, I'll trust that you folks know what you're talking about for the BPS baitcaster. The next question I'd pose would be what gear ratio would you recommend knowing that I'll be using a lot of bass jigs and soft plastics?
 
one100grand said:
Ok, I'll trust that you folks know what you're talking about for the BPS baitcaster. The next question I'd pose would be what gear ratio would you recommend knowing that I'll be using a lot of bass jigs and soft plastics?

BPS PQ use same internal parts as the Revo reels. I would go with the 7.1:1 for jigs and soft plastics, with 29" line recovery you'll be able to get your bait in and out of the areas you're fishing, you'll also be able to get the fish out of the cover quicker, and when you're fishing spinnerbaits or crankbaits you can always slow you retrieve down to get the right presentation.
 
cavman138 said:
go with the 6:1. Its a good all around gear ratio.

+1, but once you're hooked on this reel....you'll want another. When that happens, get one that's 7:1.

Tackle warehouse also has a demo program. I can't remember their conditions to enroll, but as I remember, it looked like a great deal. I've bought all 3 of my BC reels from them, and on clearance. If you decide to spend a little more......check out the ones they have on clearance. This is the last one that I bought, and really have enjoyed it. This is close to a half price sale and probably because there's a newer model available now.

https://www.tacklewarehouse.com/Team_Daiwa_Viento_Casting_Reels/descpage-TDVI.html
 
I learned on a Pinnacle Platinum Plus from walmart. I still have it and it works great for a walmart reel! once you learn, go splurge at BPS
 
I started out with 3 Cabela's Prodigy baitcast reels (made by Daiwa) - they are excellent reels for the price and pretty forgiving to learn on.
 
fender66 said:
cavman138 said:
go with the 6:1. Its a good all around gear ratio.

+1, but once you're hooked on this reel....you'll want another. When that happens, get one that's 7:1.

Tackle warehouse also has a demo program. I can't remember their conditions to enroll, but as I remember, it looked like a great deal. I've bought all 3 of my BC reels from them, and on clearance. If you decide to spend a little more......check out the ones they have on clearance. This is the last one that I bought, and really have enjoyed it. This is close to a half price sale and probably because there's a newer model available now.

https://www.tacklewarehouse.com/Team_Daiwa_Viento_Casting_Reels/descpage-TDVI.html

I looked into that but I've never ordered from them before and they want a deposit of $250 to borrow reels, plus the cost of the reel rental. I'm seriously considering the real you linked in, it seems like a hell of a good deal. I'm torn between the BPS Qualifier and that reel...just need to decide whether it's worth the extra $40 for that reel....

Now that I'm pretty much down to a reel decision, what line would people suggest?
 
I'd be a little cautious about buying one with that twitchin bar. I don't know if the viento has upgraded gears on its twitchin bar compared to the megaforce (I doubt it), because they are garbage. Mine broke in the first 2 weeks.
 
Well, I went to BPS and bought the Pro Qualifier 6.4-1 and a new pole (one of the BPS 2 piece rods), then strung it with just some 12 LBS test I had left over from my wife's spincaster.

The first bait I tied on was a 1/2 oz jig, when I went to set the brakes on it, even on the tightest setting, the jig still dropped from the top of the pole. I cast the jig a few times with no problems, then decided to try a lighter bait (a Jitterbug) and had no problems with setting the brakes. Is the jig too heavy for this reel, something wrong w/the reel, or am I just missing something? :?:
 
are you adjusting the braking system on the left side of the reel or the tension knob on the same side of the reel as the drag and handle?
 
It's a left handed reel, and it is the smaller tension knob on the same side as the drag & handle. Per the recommendation of the employee @ BPS, I adjusted the dial brake to a higher number (he said it would cause less backlashes and as I learned more about what I was doing, I could lower it and adjust it based on wind conditions).

When I put on the Jitterbug, I was able to adjust that same tension knob and get the bait to drop as I've seen it should on demos & through what I've read.
 
It just takes some time. I started with the tension knob almost completely tightened down and the magnetic braking at the highest number. You'll get the hang of it.
 
cavman138 said:
It just takes some time. I started with the tension knob almost completely tightened down and the magnetic braking at the highest number. You'll get the hang of it.

That's not the problem, for a total newbie on it, I feel I have the process right, but the jig dropped with the tension knob as tight as it would go and the magnetic brake is set high as well...
 
Top