Hello - New to forum! I am hoping that members can wrap up all in one post on "How to make / replace a transom" for my '14 tinny. I replaced my transom probably 10-12 years ago, probably using Elmer's and Rustoleum floor paint. It's held up okay over the years, but now its bowing and making noises under heavy throttle. I've searched the forum on this topic and seen the types of wood I should use but what I need specifically is:
1. What do you use to glue the layers together?
2. What tool do you use to cut the rounded ends, fitting in the gunwales / sides of boat?
3. Do you cut the sides one layer at a time or all 2 - 3 once glued together?
4. What is the best that I can coat it with for durability?
I use at times 3 different motors on this boat - 9.5 & 15 & 25. The 25 causes some concern for safety with my sub-standard transom.
Wanted to attach pics but seems as though an can't yet as a new member.
Thanks!
1. What do you use to glue the layers together?
2. What tool do you use to cut the rounded ends, fitting in the gunwales / sides of boat?
3. Do you cut the sides one layer at a time or all 2 - 3 once glued together?
4. What is the best that I can coat it with for durability?
I use at times 3 different motors on this boat - 9.5 & 15 & 25. The 25 causes some concern for safety with my sub-standard transom.
Wanted to attach pics but seems as though an can't yet as a new member.
Thanks!