Huntinfool's 1860 Tracker

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Left over goodies from a previous owner. How they got there, I do not know.
View attachment 1
That right there is the reason for it all. Hung up. I'll feed it to the console to get my FF working and then patch the floor.
 

Attachments

  • uploadfromtaptalk1427731635827.jpg
    uploadfromtaptalk1427731635827.jpg
    43.7 KB
  • uploadfromtaptalk1427731713272.jpg
    uploadfromtaptalk1427731713272.jpg
    27.7 KB

Done for now. May try and silicone the crack and spray some plastidip on it for texture and then spray color over that. Maybe. Maybe not. Just glad it done. Because that make this happen.
 

Attachments

  • uploadfromtaptalk1427742794775.jpg
    uploadfromtaptalk1427742794775.jpg
    17 KB
That's awesome. I can't wait to try mine. I've got a spot we kill the redfish on, but its full of crap. Always hanging up. I'd like to know what's down there.
 
Addison's parents didn't wake up in time to make church. But here she is a couple of days ago.

View attachment 1
She's a happy girl.
 

Attachments

  • uploadfromtaptalk1428276078627.jpg
    uploadfromtaptalk1428276078627.jpg
    33.4 KB
  • uploadfromtaptalk1428276107959.jpg
    uploadfromtaptalk1428276107959.jpg
    37.1 KB
Decided it was time to add some LED lights to the bed of my truck so I can see to get my gear out.
View attachment 1
 

Attachments

  • uploadfromtaptalk1430184918382.jpg
    uploadfromtaptalk1430184918382.jpg
    73.1 KB
  • uploadfromtaptalk1430184994363.jpg
    uploadfromtaptalk1430184994363.jpg
    36.9 KB
Well I added a new battery charger today. Had to extend the leads a tad. Luckily the instructions told me how. All three batteries are going to stay charged now.

I poured foam in front of my anchor locker, so no more lost rope! Added a stainless prop too.
 
Well Herr comes the rain again. Downtown Houston is already starting to flood. I guess the bright side is I'll get to test the boat locally now!
 
Well we came to the coast for another Blast and Cast event. I had someone take pic of my motor on plane. I think I can raise the motor a hole, what do y'all think?
 

Attachments

  • uploadfromtaptalk1434233446221.jpg
    uploadfromtaptalk1434233446221.jpg
    32.2 KB
Cool Otter photos man. There's a lake up in Gainesville we used to fish when I was in college that we saw otters from time to time, really cool animals...
 
Just read all your post. It helped me understand a lot about my boat as you cut yours out and made storage etc. Ill be following and thanks for all the info.
 
Glad I could help.
My wife wanted me to take her fishing. So we hit a small lake off of Sabine lake. Wind was blowing, but we did manage some trout and one red fish.

I raised my motor a hole, but with the chop, my wife didn't feel comfortable running wide open. Plate isn't fully out of water, but we were just on plane, not wide open. So I'll try it again.
 
Well, I haven't been on in a while. I finally got a jack plate!

3358d78217d931c911a75138af64fd88.jpg
1ae234d8bb279fc315228d9b4f135163.jpg
a5c99f17f492ab634093c21657a6f226.jpg

With the plate all the way up and the motor down the water pickup is under water. Haven't gotten a chance to run it yet...maybe in a week or two.


Sent from my XT1254 using Tapatalk
 
O, I did get a chance to go out this spring. Managed to boat a couple of good ones.
67d6814222ea2caaf478af09d35d86f4.jpg

a7e438833ce6facf195720ec0f9205f1.jpg


Sent from my XT1254 using Tapatalk
 

Latest posts

Top