Awhile back I posted pics of my tracker grizzly. I asked about the spray and motor height, and was told I need a jackplate to bring up the motor so it sits flush with the bottom of my boat. After a few phone calls to the dealer and a few arguments, they told me to bring it up so they cold run it and see what the problem was. They agreed with everything I told them and said they would recommend a jackplate, After a few more arguments about them selling me a boat not properly set up they decided to make it right and install a jackplate at their cost.
I just got back from the dealer with my boat and jackplate, now I have to run it and make the adjustments. Right now it is set as high as it can go with the foot sitting about 1 inch above the bottom, I will probably drop it down to flush and start there.
I just got back from the dealer with my boat and jackplate, now I have to run it and make the adjustments. Right now it is set as high as it can go with the foot sitting about 1 inch above the bottom, I will probably drop it down to flush and start there.