Link for Boat Modifications! Please post yours!

[brholth8]

https://www.tinboats.net/forum/viewtopic.php?t=18769

 

[Jim]

Will update list today......im a slacker, i know.

 

[Scatters]

Hi everyone I'm new to this forum and have a punt that I'm going to build just looking for a few suggestions on where to start. Wondering if I should completely remove all bench seats or not.

Cheers, Ryan.

 

[MassFisherman]

https://www.tinboats.net/forum/viewtopic.php?f=21&t=19040

 

[mdesporte2]

Greeting,(Hey Y'all)
I'm new to the site, I like what I've seen so far. Some really great mod, and re-builds. I was hope to get some ideas and info on this little jon boat I bought real cheap.
This is what I know of It!
1977 Yazoo: 14' length, 56" beam, 38" floor bottom, 16" transom height.
I plan on putting a 9.9-15hp on it with casting deck and trolling motor, other than that I'm still up in the air. any comment or suggestion will be welcomed!

 

[reedjj]

Reeds 1542 Alumacraft SwampSled

https://www.tinboats.net/forum/viewtopic.php?f=21&t=17299

 

[Jim]

all projects updated in the first post! :beer:

If I missed one or want to add yours, post JUST the link here and I will get to it.

 

[Fishin'Fool]

Hey Jim, got some pictures put up. More to come, Thanks.

https://www.tinboats.net/forum/viewtopic.php?t=16837

Fishin'Fool.

 

[back4more]

back4more's Lowe 1436L
https://www.tinboats.net/forum/viewtopic.php?t=17873

back4more's Alumacraft 1232
https://www.tinboats.net/forum/viewtopic.php?f=21&t=19121

 

[ajg6989]

My 1969 14 foot Microcraft came with a 15 hp evinrude have since added a floor and two side compartments thinking of putting the trolling motor batteries in them also got the anchor locker up front and a compartment built around the aft seat for PFD storage. I do mostly salt water fishing in the ICW. I also purchased a 50lb trolling motor which the wife loves as it is so quiet. Even the Manatees can outrun my trolling motor but nice on a lazy day. Was thinking of getting a bimini top as I need some more sun protection. Wife has a seat umbrella up front that she reads her kindle book under while I act like I am fishing.

 

[bassboy1]

Customer's 1648 G3 mod.

https://shareaproject.com/pages/projectTut,p,897,00.html

 

[Express]

https://www.tinboats.net/forum/viewtopic.php?f=21&t=19237&p=198549#p198549

 

[Jim]

all projects updated in the first post! :beer:

If I missed one or want to add yours, post JUST the link here and I will get to it.

 

[Bigalphaone]

:roll:
Found this site AFTER I found an old boat. I am new at this and I am not a carpenter by no means. I've seen some pretty hip mods here...now I'm joining the team...pictured below is what I have, I've not put the boat in the water yet for a leak check and I am reluctant to start the floor mods until I float it. I have filled it with water and nothing has leaked, so far. But I have read that this is not a true test until there is water pressure without trying to get in!

 

[Drakedoghunter]

How do I post my boat project on here???

 

[Jim]

How do I post my boat project on here???

Create a project in this forum (but not in this thread). Then add your link here and I will add it to the projects. PM me if you have any questions.

Jim

 

[Drakedoghunter]

Hello there guys!!! All these boats have inspireded me for my build...hope you like it!!! I am taking my 1960's Alumacraft V-hull 16ft long 4ft wide and putting a deck up front and in back and then making it flat in the back.

 

[taterosu]

https://www.tinboats.net/forum/viewtopic.php?f=21&t=19836

 

[jbd6c6]

A few months ago my friend and I bought a 16 foot aluminum V-bottom and trailer. The carpet and decking were rotting, boat filled with mud, a real junker. Since it was too cold to take her out for a test run, and we didn't have a motor, restorations began. This was our first boat, an upgrade from the kayak we'd been using to bowfish the creek with. Supplies were scarce, ideas were primitive, but it was a fun stepping stone to what we have now. Soon after purchasing the boat I got a good deal on a "ran last time it was used" 12 hp 1968 Buccaneer that we tuned up to working condition.

 

[Seanbassfishing]

Help