bassking920
New member
- Joined
- Jun 21, 2015
- Messages
- 1
- Reaction score
- 0
I modified my 14' Gamefisher and wanted to get some feed back and maybe some ideas on some small upgrades.
TinBoats.net
The original aluminum boat site!
My 14' gamefisher modification
- Thread starter bassking920
- Start date
Help Support TinBoats.net:
I modified my 14' Gamefisher and wanted to get some feed back and maybe some ideas on some small upgrades.derekdiruz1
Active member
- Joined
- Jan 7, 2015
- Messages
- 38
- Reaction score
- 0
I like this a lot actually. I pretty much wanted to do this exact same thing with my 12ft gamefisher, however I think i'm going in a slightly different direction for duck hunting from it. Overall great though.
Looks pretty good from what I can see! I amazed at the flooring and bulkheads some of you guys on here stuff into 12' & 14' rigs :shock: !
Maybe whereas I run in the salt, and want all usable power to the hull as I can, with the lowest center of gravity, I/we tend to add a minimal floor and that's it. Then again, there's no safe sea state for an elevated seat in the salt, at least above FAC (flat ass calm ...).
Do you tiller steer it from that elevated seat? What do you have for power? I'd also make sure you wear the ignition kill lanyard ...
Maybe whereas I run in the salt, and want all usable power to the hull as I can, with the lowest center of gravity, I/we tend to add a minimal floor and that's it. Then again, there's no safe sea state for an elevated seat in the salt, at least above FAC (flat ass calm ...).
Do you tiller steer it from that elevated seat? What do you have for power? I'd also make sure you wear the ignition kill lanyard ...
