My 2010 1648 Smoker Craft Jon

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

x-hunter

New member
Joined
Apr 21, 2010
Messages
3
Reaction score
0
Hi All!

First i would like to thank everone that is posting their mods on this board. I got some great ideas as to what I waned my boat to look like when I was finnished with it. I fish and hunt in a rather big lake that can get ugly very quick when the winds pick up. So I wanted my mods to be practical, yet I tried to keep the weight of the boat down.

All but the front floor is finnished and 90% of the electical work is done. There is a switch plate behind the rear seat which I forgot to take a picture off. To finnish the electrical work, I want to install lights in the front and rear just above the floors so we can see our geat when we go out before light breaks.

I Started out with this:

Polarkraft.jpg

Designed this:

Polarkraft1.jpg

And this is where I am so far:

IMG_2155a.JPG


I have uploaded more pictures to my site:

https://teamx.ca/1648/


X
 
Thanks! Actually, I had to cut out one side of milk cart to make it fit. I didn't want the anchor to be bouncing off the floor. It also allows the water from the anchor to drain through the bottom holes. Not pretty, but practical. :D

X
 
Top