YoungClayB
Member
- Joined
- Feb 17, 2009
- Messages
- 13
- Reaction score
- 0
I have been looking for some good rod holders to mount on my boat, but I didnt really like any of the ones that I saw for sale in the stores. So I got some 4" PVC pipe and made some of my own. Once you get the hole pattern figured out, you can make batches of these pretty quick.
I got the idea from https://www.catfish1.com/forums/showthread.php?t=1702, but I made a few small changes...namely, I used a 1 3/4" bit for the bottom hole, but I used a 1 1/4" bit for the top hole to keep the rod a little more securely in place. I also rounded the edges out a little more on the bench sander.
I got the idea from https://www.catfish1.com/forums/showthread.php?t=1702, but I made a few small changes...namely, I used a 1 3/4" bit for the bottom hole, but I used a 1 1/4" bit for the top hole to keep the rod a little more securely in place. I also rounded the edges out a little more on the bench sander.