Nussy
Well-known member
Well it's build #3. Here's my blank slate to start with 2-24' pontoons 18" in diameter. Found on Craigslist..a little beat up but it's really hard to find used pontoons....or even a trashed old pontoon boat.
I plan to cut them in 1/2 and build two similar boats out of it. I figured I can learn on the first one and make some tweaks for the 2nd build and sell the first one. Here's the layout of how I plan cut them up.
Then I'll basically take the 12 foot pontoons and build this. Current plan is 6 foot wide with a deck of 9' long. bow and stern trolling motor setup. I'm thinking 100" aluminum....but I do have some carpet to burn from my last build so we'll see how the budget goes.
Open to suggestions. Stay tuned.
I plan to cut them in 1/2 and build two similar boats out of it. I figured I can learn on the first one and make some tweaks for the 2nd build and sell the first one. Here's the layout of how I plan cut them up.
Then I'll basically take the 12 foot pontoons and build this. Current plan is 6 foot wide with a deck of 9' long. bow and stern trolling motor setup. I'm thinking 100" aluminum....but I do have some carpet to burn from my last build so we'll see how the budget goes.
Open to suggestions. Stay tuned.