Progress on my unknown 14 ft boat. Feel free to identify it.

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Craigmax

Member
Joined
Jan 30, 2015
Messages
11
Reaction score
0
What do I have in my $150 Craigslist find guys? Trailer was included. Googling pictures tells me a Richline.

Been chopping wood on her since january. Wire wheeled and angled ground to bare medal on the hull. gluvit applied heavily, self etching primer applied. two coats of rustoleum on the inside, two on the out with a third coming. several rivets replaced after leak test, new stern corner supports made at metal supermarket for $16. bunkers have 5 coats of spar with one carpeted and the other to be done tonight. transom has 5 coats of spar as well. Have a Johson 8hp i picked up for $200 needing the carb done so i bought a new impeller, carb kit and fuel pump kit. New Humminbird Helix 5 SI/GPS came in Friday as well for $400.

I bought this boat to build for smaller lakes as I only chase bluegills but I'm buying a Tracker Deep V16 in the next couple of day so she's going to go and i need some advice:

Bench seat building? What type of bracket to use? 2x8 for wood or 2x6? Carpet them?
Suggestions on selling price once complete? Not looking to make a killing but I have an Excel spreadsheet of everything I've purchased on this build which is around $800. Any feedback, input, suggestions, recommendations are greatly appreciated.
 

Attachments

  • 20150207_155009.jpg
    20150207_155009.jpg
    68.9 KB
  • 20150207_154940.jpg
    20150207_154940.jpg
    50.9 KB
  • 20150127_193641.jpg
    20150127_193641.jpg
    67.6 KB
  • 20150410_104914.jpg
    20150410_104914.jpg
    39.7 KB
More pictures
 

Attachments

  • 20150415_184953.jpg
    20150415_184953.jpg
    47.6 KB
  • 20150411_170621.jpg
    20150411_170621.jpg
    55.9 KB
  • 20150401_194306.jpg
    20150401_194306.jpg
    73.9 KB
corner supports and bunker. i extended the widths of the corners as you can see the transom is split. Same on the other side as well.
 

Attachments

  • 20150417_132818.jpg
    20150417_132818.jpg
    34.1 KB
  • 20150419_164327.jpg
    20150419_164327.jpg
    33.1 KB
Looking good so far, it'll be a nice boat when you're done.

I'm not an expert, but I constantly scour craigslist for aluminum boats. Around here, a well-done restored boat with 8hp johnson would probably get listed for $1700-2200. Hell, a lot of people ask that for their basketcases. I don't know what people actually pay for the boats, but that's what it would be listed for. If the fish finder was $400 and is something you'd use on your next boat, I'd say hold onto it as it won't raise the value of the boat that much.

Also, what size boat is it? I made that estimate assuming it was a 1236, if it's bigger, you'll find it easier to get more out of it.
 
Thanks guys. She's 14 feet long. I'm in Ohio now picking up my new-to-me 2002 Tracker Deep V16 in excellent shape. Couldn't sleep and cant wait to get it home.
 

Latest posts

Top