Where do you have your tiny tach mounted?

[lugoismad]

I bought a tiny tach for my motor so I can watch the RPMs while I try to find a prop thats right for it.

The wire on it to wrap about the spark plug wire isn't very long.

Where did you mount yours? The one I got is water resistant, I was thinking about double sided taping it to the motor cover on the outside?

 

[jasper60103]

Mine is attached to the transom right below the motor.

 

[Zum]

Attached mine to the carrying "handle" on a 30hp.

Sent from my SM-T350 using Tapatalk

 

[Sinkingfast]

I wish one would make a tach with a max rpm display that would hold until cleared. Then I could just stuff it in the cowl and check it after a run.

I just had mine screwed to the lower fixed cowl..until its failure.

 

[hipster dufus]

i have mounted all 3 with velcro right under the motor on the transom. my first 2 were on tillers and i could read them easily. my new one is on my CC and i have to turn around to read it. i used it to find my rpm sweetspot and now i use it for maintenance intervals i can stretch the cable out and read it while running if i have to.

 

[BigTerp]

My is screwed to the gunwale rib right beside my control box. I can see it easily when under way. I extended the wire several feet to get it up beside the control box and drivers seat. Easy to extend the wire so you can put it where you want.

 

[DaleH]

Keep it out of the sun as UV can bake those LCD displays.

 

[turbotodd]

Mine's mounted on a little aluminum bracket that I made. The bracket sandwiches between the swivel bracket and the tiller handle; on the old Yamaha there's a 2 bolt setup and that's where I put the bracket. Real easy, and looks factory installed.