Your first TinBoat. Post you pictures.

gillhunter · Jul 27, 2024

I ran a similar thread years ago. Lots of new members, thought I try it again.
Mine was a 14' Crestliner with a 20hp. pull start Mercury 2 stroke.
Had a 30 lb. Minn Kota trolling motor. Got it in 1995, kept it for 2 years and sold it to buy the second of a total of 5 boats I've owned.

That guy down below is a much younger gillhunter.

FuzzyGrub · Jul 27, 2024

A 14’ Fishmaster purchased from Walmart in the early 90’s. Initially run with a ‘63 10hp Sportwin. Later an 18hp Nissan. Trailer was a galv shore lander purchased online and had to assembled. Used for many years. Son caught his first Susky smallmouth in it. Outside of the Nissan, which was sold with my son’s first boat, still have the rest. Sorry, no pics on my phone.

LDUBS · Jul 27, 2024

My first tin boat was actually my 5th boat. I'm pretty sure it was 2016. Klamath 15' side console with 25 HP merc four stroke. Here is a fuzzy pic.

TexasJim · Jul 30, 2024

Not my first Tinny, but second, and this is a newer pic of TIN STAR, a Blue Star 14.

airshot · Jul 31, 2024

Whew....have had so many tin boats, I don't have enough fingers to count, guess the shoes gotta come off !

FuzzyGrub · Jul 31, 2024

airshot said:
Whew....have had so many tin boats, I don't have enough fingers to count, guess the shoes gotta come off !

Well, you usually remember your first!

airshot · Jul 31, 2024

FuzzyGrub said:
Well, you usually remember your first!

That was a 10' Jon boat, bought new back in 1963 for my birthday with my grass mowing money. Picked up a 1954, 5 hp, Sea King motor for it as well. Boat was 95 dollars, Motor was just gone thru by the dealer, new water pump and a tune up for 125 dollars. I was king of the river with that outfit !!

Tin Man · Jul 31, 2024

gillhunter said:
I ran a similar thread years ago. Lots of new members, thought I try it again.
Mine was a 14' Crestliner with a 20hp. pull start Mercury 2 stroke.
Had a 30 lb. Minn Kota trolling motor. Got it in 1995, kept it for 2 years and sold it to buy the second of a total of 5 boats I've owned.

That guy down below is a much younger gillhunter.
View attachment 121995

Your Ford Explorer, connected to your boat, reminds me of my father.....he had a '93 Explorer that he used to drive from CA to FL to purchase a '78 Drascombe Lugger sailboat. He was 65 at the time (back in 2008). I often think about this....I'm 61....would I venture to FL to purchase a boat? He really wanted that boat!
NOTE: He's currently 81 and is refurbishing a Crestliner 14 Sportsman. He's not much into forums anymore, or I'd have aboard our forum here!

monzster · Aug 2, 2024

My 1973 14' Desoto. Picture when first bought and now.

airshot · Aug 3, 2024

With a name like Desoto, I was expecting some big tail fins comming off the back ! Unless your an old geezer like me, you might not get that unless you into old cars. Lol...

JL8Jeff · Aug 3, 2024

Here's a picture of my first (and current) tin along with the 2nd tin (long gone and wish I still had it). The one on the left I still have and was my first tin boat.

AlexNado · Aug 4, 2024

Bought this summer 1967

LDUBS · Aug 4, 2024

AlexNado said:
Bought this summer 1967
View attachment 122093

Looks like fun!

Hooscrazy · Aug 6, 2024

Just bought this yesterday. 1978 Grumman 4.4 Open, 1977 trailer, 2007 Mercury 9.9 4 stroke. Retiring in 4 weeks. Plan on restoring this boat as best I can. Looking forward to reading and looking at this site to see what others have done. Thanks! AT

Grumman4.6 · Oct 8, 2024

First Tin Boat!

Bought for $500. Grumman 4.6-784 with running 35hp Evinrude. I rebuilt the steering and electronics panel. Was 3/4” plywood I replaced it with 3/4” black HDPE. New fuse & switch panel and Brand New OE Ignition Switch. Even found a Brand New Evinrude 35hp Model Match Service and Parts Manual. Going to restore the floor with 1/2” White HDPE Acrylic and carpet. Casting deck up front. ANY INFORMATION on Owners Manual or Literature Copied from Grumman, Marathon or Evinrude is Hugely Appreciated. I have found 0 literature on this vessel especially the model variances. Thank you! Glad to be here!

KurtV · Oct 14, 2024

Just bought my first one last month! 1986 Lund 16 foot Mr. Pike. Purchased from the original owner!

Gradar68 · Oct 19, 2024

This is actually my second tin boat and also the second boat I have ever owned. I didn't have my first tin boat for very long and unfortunately don't have any pictures of it. It's a Alumarine 16 HD. It's manufactured in Prince Albert, Saskatchewan

Bantou · Oct 21, 2024

First one was a 10' John that Dad got as a birthday present when I was a kid. We put a 3hp Merc knock off on it and ran it around for years. I'm currently working on the first one that I'll officially own (as time and funds allow). This one is a 16' MonArk that I'm putting a 15hp Johnson on. See my post history for pics and details.

perki307 · Oct 22, 2024

12' w/ 6hp Evinrude - my first, not just tinner, but boat.
Lots of canoes and kayaks but this takes a LOT less physical exertion! LOL

Shadow Jr. · Oct 23, 2024

First aluminum 14' Sea King 1960s boat and trailer that I purchased for 300 bucks. Totally refurbished the boat and trailer from top to bottom. It was a labor of love that took me all winter to do. But it was worth it to me because in the end it turned out super nice.

Your first TinBoat. Post you pictures.

Help Support TinBoats.net:

Moderator

Attachments

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

New member

Attachments

Well-known member

New member

New member

Attachments

New member

Attachments

New member

Attachments

Well-known member

Member

Attachments

Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!