Yamaha F6 transom bracket

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GatorNJ

New member
Joined
Aug 26, 2024
Messages
3
Reaction score
3
LOCATION
Dayton NJ
I have an Alumacraft Prowler 175 with a Yamaha F70. I fish a restricted HP lake once in a while and want to put a 6 HP Yamaha on the transom. I have limited space so I need the bracket dimensions to see if it will fit. Could not find a technical drawing online and Yamaha customer service was no help. Anyone have a 2024 F6 or similar model that could help with the dimensions?
 
Last edited:
Spoke to a local dealer and he found the dimensions in the service manual. I found the dimensions online in a manual from 2019. Seem to be the same as 2024 model. I attached a picture below in case anyone else is searching for this information.
 

Attachments

  • IMG_0010.jpeg
    IMG_0010.jpeg
    62.7 KB
Excellent and thanks for sharing. Do you also have to consider the width of the motor cowling? I would guess it will be a few inches wider than the clamp brackets.
 
Excellent and thanks for sharing. Do you also have to consider the width of the motor cowling? I would guess it will be a few inches wider than the clamp brackets.
Yes I did find that somewhere. It’s about 13.5” wide.
 

Latest posts

Top