Anyone have any videos of there local rivers?

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Chris Cannon's run on the UP between Brunswick MD and Harper Ferry WV. I about peed myself a little at the 2 minute mark...

https://www.facebook.com/video/video.php?v=1048374971649

Jamie
 
I think Chris used up some of his karma points making it through that rock maze. He would know what I'm talking about. :wink:
 
A few videos from today. Took a break from fishing before loading up the camping gear.https://www.youtube.com/watch?v=dRKGB8yAQBo&feature=youtube_gdata_player https://www.youtube.com/watch?v=GfgM-4wIgok&feature=youtube_gdata_player https://www.youtube.com/watch?v=ik8sG3n-NZ4&feature=youtube_gdata_player
 
lowe1648 said:
A few videos from today. Took a break from fishing before loading up the camping gear.https://www.youtube.com/watch?v=dRKGB8yAQBo&feature=youtube_gdata_player https://www.youtube.com/watch?v=GfgM-4wIgok&feature=youtube_gdata_player https://www.youtube.com/watch?v=ik8sG3n-NZ4&feature=youtube_gdata_player

Where were you?

sf
 
i like watching you jump the sand bar.Tell me what motor you are running on that tiller steer boat and I am also wondering what size of old Mercury is on the other boat.
 
mike s said:
I Notice that nobody posted anything after SH's videos. Haha. Those are the best RP videos I've ever seen.

All four of these vids are from the same stretch of Youghiogheny river in Southwestern PA. Some of these are on another thread in the sponsors area, so apologies if you've already seen them....

Here's one from last weekend. The water was up hiding some of the boulders that are usually easily avoided. Check out the near miss at about 1:14 into the video. I knew it was there, but couldn't see it until it was right next to the boat.
https://www.youtube.com/watch?v=XPVdjeQmylI

Here's the first video I took with my RiverPro last fall. It's very shaky and hard to watch, but you'll see me bounce over a "wet rock" gravel bar. First time through this stretch and was unfamiliar with it.
https://www.youtube.com/watch?v=DYd3Hu1d-18

This one shows a very "nice" impact from an invisible boulder. My river is known for having large boulders in deeper water leaving almost no signature. Found one!
https://www.youtube.com/watch?v=MaxjWZiO61I

No big impacts on this one, but still a cool video along with a nice fish.
https://www.youtube.com/watch?v=GR2Jsw_wEEQ


Nice job on production there Mike!!! I like the musky vid, pretty sweet! Glad you got an RP... Been a huge treat for my family and fishing of course! =D>
 
hotshotinn said:
i like watching you jump the sand bar.Tell me what motor you are running on that tiller steer boat and I am also wondering what size of old Mercury is on the other boat.
They are the same size motors and boats as the last time you asked. 40/28 Yamaha tiller and 115 merc
 
Good stuff on here!

I have a few on my youtube channel, and will probably eventually take footage on some other rivers, as well.... like the Santee, PeeDee, and Black Rivers.
 
Some video of the St. Croix.. lots of sand bars..

https://www.youtube.com/watch?feature=player_profilepage&v=xPYOFCfsusc
 
I like watchin those jet boats going up the river =D> I especiilly like that115 hp on camoeman jet baot.Is that a six cylinder 115?or a 4?How fast doesit go?
 
hotshotinn said:
I like watching those jet boats going down the river =D> I especially like that 115 hp on canoeman jet boat.Is that a six cylinder 115?or a 4?How fast does it go?

Its a 1986 in-line 6, fully rebuilt 2 months ago. With 300 lbs of batteries(4 - group 31),20 gallons of gas and 2 guys and gear it hits 32 MPH.

Ive been debating about taking out the 3 group 31 batteries and get it down to a 1/4 tank and see what it will do, but I'm not overly concerned about speed as hole shot,plane and performance.
 
Those inline 6 cylinders are good motors.I once had one on a ProCraft bass boat and she would fly :mrgreen: I bet your motor burns up gas with that jet pump onit #-o
 
Apparently the "ice pack" is working its way down the Miss..

https://www.youtube.com/watch?v=INJODsP5Op0&feature=feedu
 
here is 1 we sent to B.C. it is 15'4" 175 hp ecotec inboard with a 751 scott jet with hyd trim 60" WIDE BOTTOM IN .190 thick

https://youtu.be/weqPQ7O2viM
 
and 1 more of a jet boat that has a 143hp turbo weber with a scott 751 jet pump and a friend at the wheel who told me that anybody
can drive a jet boat up this channel =D>
he soon found out that he is not the pro driver he thinks he is. but its all good on the river on a nice day like this in montana.

https://youtu.be/gI1UgvzAEXY
 
randoms from last spring

https://www.youtube.com/watch?v=krc6BTbqzlM&context=C315fb77ADOEgsToPDskKyAlVOy9UgbkW0tQ8Jl2cj
 
Here is our little rig headed up river after a morning of duck hunting:

https://www.youtube.com/watch?v=KKNUXganLb4&feature=plcp&context=C3234b78UDOEgsToPDskLYxdCm1ODmHyg_ptUASAMB
 
Had enough of ice fishing yesterday and got out in a buddies boat for a few hours today.
https://www.youtube.com/watch?v=-IOtmcimQg8
https://www.youtube.com/watch?v=C9foZK4Z2Sc&feature=channel
 
here is a vidya from this morning on a creek feeding lake norfork.

https://www.facebook.com/video/video.php?v=10150675674964443
 
Top