New live sonar that doesn't reqired a FF

[wmk0002]

Yeah, not something I would personally be interested in, however, I'm all for more competition in the industry as it helps keeps things innovative and competition helps keeps prices relatively lower (yeah I know all this stuff is a still $$$ lol).

 

[LDUBS]

Taiwan is the Republic of China, Mainland China is the Peoples Republic of China.

Thanks - zoomed right by me.

 

[Still Afloat]

I bet HB's R&D team is working on a similar concept as we speak.

If I have an iPad with the App, I wonder if I could steal the signal from the other boats around me.

And all for only a bazzilion dollars plus all the options.

 

[Ray Clark]

I also think Garmin's are made in Taiwan. As far as I know my Hummingbird is still made in Alabama.

Your comment made me go look.

According to Johnson Outdoors' web site, H-birds are still "designed, engineered, manufactured, and maintained in Eufala, Alabama." The only model series "outsourced" is the Piranha series. Of course, they could be importing certain parts, like circuit boards, from offshore suppliers. I'd be surprised if they didn't.

Johnson Outdoors' web site also says that Minn Kota trolling motors are also US-made.

 

[airshot]

Before retiring, I worked for a couple companies that used Taiwan for some of their production. Quality control was very good as they allowed inspectors into their country to check quality before parts left the country. China itself produces faster but less quality control and your only inspection is when their products come into the US. Taiwan has a much higher approval/ quality control, than China themselves. The quality control folks always spoke highly about Taiwan quality. I have a side x side UTV made in Taiwan and the quality has been excellent, even after 10 years.

 

[MrGiggles]

Before retiring, I worked for a couple companies that used Taiwan for some of their production. Quality control was very good as they allowed inspectors into their country to check quality before parts left the country. China itself produces faster but less quality control and your only inspection is when their products come into the US. Taiwan has a much higher approval/ quality control, than China themselves. The quality control folks always spoke highly about Taiwan quality. I have a side x side UTV made in Taiwan and the quality has been excellent, even after 10 years.

In terms of hand tools, Taiwan is excellent, China can be a coin toss.

I used to be a big fan of Gearwrench until they started sourcing everything from China. Been buying from Tekton ever since.

 

[Still Afloat]

I think we taught the electronics industry to China quite well. The junky stuff is the low tech. I bought some welding clamps last winter that were supposed to hold two piece parts square to each other. Unfortunately the four clamps varied from 92 to 95 degrees. At least Amazon is good about returns in most cases.

 

[InSaneFisherMan]

I think we taught the electronics industry to China quite well. The junky stuff is the low tech.

I remember saying similar statements about Japan, when I was younger.

Poor quality is poor quality no matter where it's made.

I am just not a fan of funding adversaries, but not going to get political.