Post a Pic of your boat!

[CLM]

Here is one.

And the other, currently building it.

 

[peabody]

Gramps50 » 01 Mar 2012, 21:33[/url]"]Recently I bought a Polar Kraft 1651, has a Mercury 200 20 hp and an old Evenrude trolling motor. This picture was taken when I brought it home. Since I have added a cover. I also want to rewire it adding a fuse block with a ground buss.

View attachment 1


Getting ready for a test drive, that's the previous owner in the drivers seat.

wbere is murphy missouri ?

 

[cobbtm2003]

Heres mine!

 

[kidhickey]

t]

Found in barn. 1974 MirroCraft Fisherman, 1959 18 hp Evinrude, 1966 33 hp Evinrude Electric start
and a 1963 Homemade trailer, Boat was last registered in 1997 and the trailer 97 sticker on plate
Ripped out homemade side console and all the old pulley & cable steering, cut down the back of trailer and added 3 more ft. on the tongue , sandblasted, primed & painted. Cleaned up the 18 hp and she runs nice. did not try and start the 33 yet but took out plugs and put a little 2 cycle oil in cylinders
pulled over fine with pull starter, and with the electric starter when I hooked up a battery. Taking out seats now to put a flat bottom in, Dudley,MA.

 

[chazrull]

Just got this boat. It's a "91 Basstracker Pro 17. After a little trouble with the starter pinion gear I took it out for a check out ride last night and snapped this pic. It was pretty filthy when I bought it but after cleaning I was pleased. Crazy thing is the PO had a boat cover for it - it was on the ground next to the boat, also dirty. :roll:

 

[chazrull]

Here's my 2nd boat (don't have pics of my 1st boat bought and sold many years ago). I bought this one because my girlfriend likes to fish, but I wasn't sure how often we would go so I went small. Since then I found out she LOVES to fish. Sometimes I walk outside after work to find her waiting with a 6 pack of beer and a bucket of minnows. So I bought a Basstracker and I guess I gonna sell this little fellow.

 

[Jeeper]

1978 smokercraft which now has a 58 evinrude on it

 

[MaineFisherman]

1968 Starcraft Jet Star 15 with 1987 Johnson 25hp. Just brought it home yesterday, installed a new water pump kit in the motor this morning, and took her for the first test ride this afternoon.
I would like to restore her, but that'll have to wait until after fishing season....

 

[Paddler]

Alumacraft MV1544 Waterfowler - Allweld - 25 HP Mercury

 

[MiPikeGuy]

My not-so-tin boat, all rigged up and ready to go for under $450

 

[MiPikeGuy]

MiPikeGuy » 12 Jul 2013, 19:05[/url]"]My not-so-tin boat, all rigged up and ready to go for under $450

 

[bluepike]

Have always wanted to thank Duroboat for their product that we have enjoyed for the past several years.
Bought used in say 2005, this 16' tin boat is very dry, cuts nicely through heavy chop and planes fully loaded with me and my three big buddies readily with a 2000 25hp Johnson.
Boat was built in 1989 in Florida I think and has traveled to upstate NY lakes and is currently in Moriches Bay, Long Island NY where my son uses it several times a week scuba/free diving and fishing. And yes son does take it through Moriches inlet to the ocean [-o< and trailers it to Montauk Point.
Other point to be noted, boat had severe issues when purchased regarding corrosion. Customer support from Duroboat solved same with correct anode suggestions.
There are not many around Long Island, if you see one that fits your needs buy it, you will be pleased.
I just wish that they would build an 18 footer.

 

[Jim]

duroboat rocks! The owner is a stand up guy for sure. He is also a member here.

 

[flatboat]

my purtty new toy! This boat does not porpoise ! only one I have ever owned that doesn't ,and its fast!

 

[Country Dave]

flatboat » Today, 15:00[/url]"]my purtty new toy! This boat does not porpoise ! only one I have ever owned that doesn't ,and its fast!

Looks cool, how fast and how many ponies?

 

[TimRich]

New toy, 2010 crestliner 1436 with 6 hp yamaha 4 stroke.

 

[RangerJ]

Fits my needs nicely - I can use this in the rivers near my home, or proge along the creeks running through the marsh.

 

[Mack17]

Here's my rig it's a 1979 14' Alweld with a 1980 Johnson 70hp.Eventually going to redo the front decking with new wood and carpet and repaint it olive drab green and put the factory Alweld decals back on it and repaint the motor with the factory 80's Johnson decals.But for now she does just fine.Runs 35-40 mph at wot.

 

[SquiggyFreud]

Hi All,

2012 Alumacraft MV 1650 with SC, and F40 Yamaha.

 

[Bronzbackhunter]

Here's my new to me 2007 G3 1548AW, with a 2014 merc 9.9 Bigfoot. Installed the 9.9 & jackplate yesterday. Took it out this morning to start the brake in.