Replacement prop help

[IndyBassin]

I've got a 1961 Johnson Seahorse 5.5 outboard (cd-18) that has a broken prop blade.

Is this something I can replace myself?

If so, can anyone point me to somewhere I can buy one online?

 

[Captain Ahab]

I am sure you can replace it yourself. Props are made to be changed out in most motors.

I know nothing about those old outboards but I am sure one of our members can help

 

[BlueWaterLED]

Try calling these guys: https://www.deltaprop.com/

These are the Michigan Prop guys and carry lots of new and used aluminum props.

 

[papasage]

that modle has a sher pin in it . carter pin through a nose cone . the sheer pin is under the nose cone . the pullthe prop off .it may have a nut and the sheer pin behind the prop fits in a slot .

 

[Jim]

that modle has a sher pin in it . carter pin through a nose cone . the sheer pin is under the nose cone . the pullthe prop off .it may have a nut and the sheer pin behind the prop fits in a slot .

:WELCOME: papasage!

Thanks for joining!

Jim

 

[bobessary]

take it off and take it to a local prop shop many of them can repair the props if they dont have a replacement

 

[papasage]

https://www.deltaprop.com/shopdisplaycategories.asp?id=448&cat=Outboards

 

[IndyBassin]

I got lucky, found a local repair place who has just what I need for $30

Now I just need payday to get here faster

 

[IndyBassin]

that modle has a sher pin in it . carter pin through a nose cone . the sheer pin is under the nose cone . the pullthe prop off .it may have a nut and the sheer pin behind the prop fits in a slot .

thanks for the scoop, I'll let you know how it goes!