bassin0331
Active member
Well took it out today and moved some weight around and she planed out but still under to much load, ordered a new prop with smaller pitch so should be ready to rock, went 20 according to GPS but I know she's has more in her
TinBoats.net
The original aluminum boat site!
Grizzly 1448 wont PLANE HELP!!!!!
- Thread starter bassin0331
- Start date
Help Support TinBoats.net:
richg99
Well-known member
Great news..... if your prop was as damaged as you indicated...there was power/thrust being lost just there. Hope it works even better when you get the new one. richg99
I may be late to this dance but can you find a long shaft extension to add to the engine? It might prove to be the easiest fix in the long run.
1" above, we have to remember it's not a cavitation plate, it's an "anti" cavitation plate. Should be sledding or skimming across the top of the water or ever so slightly under. (1/8")
1" above, we have to remember it's not a cavitation plate, it's an "anti" cavitation plate. Should be sledding or skimming across the top of the water or ever so slightly under. (1/8")
Skiffing
Well-known member
Just curious - what boat did this engine come off of? I think you need to know the engine
WOT RPM.
1. Difference in weight between the two
2. WOT RPM & speed each boat
3. Current prop
WOT RPM.
1. Difference in weight between the two
2. WOT RPM & speed each boat
3. Current prop
