My jet boat build

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rock_smasher

Member
Joined
Jan 20, 2010
Messages
8
Reaction score
0
Greetings, folks! I've been hiding in the weeds awhile, finally have some pictures of my project and some sea testing.

I wanted-
a boat that was easy to launch and handle with 1 person, superdawg is useless on the ramp.
able to access shallow water, not afraid of stumps and logs.
reliable
stable platform, able to walk around while making fishing gestures.
reasonably priced and affordable to use at current gas prices.
 

Attachments

  • boat 009.jpg
    boat 009.jpg
    156.6 KB · Views: 1,452
  • boat 003.jpg
    boat 003.jpg
    143 KB · Views: 1,452
Started with a craigslist find- a 15.5 fiberglass boat, semi-flat bottom with a fried 50hp outboard on a trailer. Added the jetpump/motor mount section from a kawasaki tandem sport jetski. (A HUUUGE!!! thank you to my friends- jerry the fiberglass guy and brandon the sailor man!!! =D> )
 

Attachments

  • 0204101637.jpg
    0204101637.jpg
    124.1 KB · Views: 1,444
  • 0204101642.jpg
    0204101642.jpg
    148.7 KB · Views: 1,444
cutting the hull, fitting and 'glassing the donor section in.
 

Attachments

  • 0209101343a.jpg
    0209101343a.jpg
    179.3 KB · Views: 1,442
  • 0209101326b.jpg
    0209101326b.jpg
    179.1 KB · Views: 1,442
  • parts3 048.jpg
    parts3 048.jpg
    164.8 KB · Views: 1,442
  • parts3 047.jpg
    parts3 047.jpg
    164.3 KB · Views: 1,442
  • parts3 046.jpg
    parts3 046.jpg
    127 KB · Views: 1,442
  • 0329101135.jpg
    0329101135.jpg
    147.6 KB · Views: 1,442
  • 0329101135a.jpg
    0329101135a.jpg
    158.5 KB · Views: 1,442
came out way beyond what i'd hoped for
 

Attachments

  • 0401100838a.jpg
    0401100838a.jpg
    177.9 KB · Views: 1,442
  • 0401101316.jpg
    0401101316.jpg
    133.5 KB · Views: 1,442
  • 0330101447.jpg
    0330101447.jpg
    161 KB · Views: 1,442
  • 0329101319a.jpg
    0329101319a.jpg
    199.2 KB · Views: 1,442
  • 0329101319.jpg
    0329101319.jpg
    172.2 KB · Views: 1,442
This is a Kawasaki 650 motor, rated approx 65hp. My original plan was a boston whaler type center console, until I ran it on the water. I have since gone with conventional bass boat seating. The horrible mechanisim on the side of the console was for the trim, and the throttle was the thumb throttle mounted on the orange hand hold.

The boat worked good, but the balance/weight distribution was way off.
 

Attachments

  • 0417101255c.jpg
    0417101255c.jpg
    100.9 KB · Views: 1,441
  • 0417101255b.jpg
    0417101255b.jpg
    118.4 KB · Views: 1,441
  • 0417101255a.jpg
    0417101255a.jpg
    116.6 KB · Views: 1,441
  • 0414101914a.jpg
    0414101914a.jpg
    180.4 KB · Views: 1,441
  • 0414101913.jpg
    0414101913.jpg
    158 KB · Views: 1,441
  • 0401101317.jpg
    0401101317.jpg
    176.2 KB · Views: 1,441
The next batch of pics is temporarily missing for now-

I went with normal bass boat type seating, with the motor between driver and passenger. I built a simple plywood cover for the motor and some temporary seating and we headed for the lake.

After 10 or so outings, I have to say I LOVE THIS BOAT!!!! It came out so much better than I had hoped for! It's still a work in progress, but so far it has been great fun. It will float in 6" of water with 2 adults in it, will carry 4 ppl @ 25mph, will do approx 33mph with 2 across 6" of water, no problem. I've ran over stumps, logs, and a submerged railroad tie with no damage.

The only problem i've had, was while on a full moon cruise with wifey, the pump clogged with moss... Other than that, it's been push button fun.

Still need to finish the loose ends, enclose the motor, better seating, floor, reverse... the list goes on. But, as I look at it now, it has been a wild success! It's very easy to launch and trailer by myself, goes everywhere I have tried, has always started and brought me home, and will go for a weekend on a 6.5 ga tank of gas. AND I've spent about 800.00 dollars on it to this point, I'd call it a bargain!
 
Top