Post a Pic of your boat!

[Tim Murphy]

Dear Board,

I picked her up today. A 1990 Smokercraft 168MG with a 1982 Evinrude 35 rope start on the back.

The only things I plan to add to her in the immediate future are fish scales and slime.

Regards,

Tim Murphy

 

[fender66]

Hey Tim....looks good. Congrats on the new ride. Sounds like your immediate plans are perfect!

You might want to put your location in your profile. You'll most likely meet up with others in your area.

 

[Tim Murphy]

Dear Fender,

Location has been added, thanks for the tip and the good words about my new to me boat.

Regards,

Tim Murphy

 

[huntinslabs]

Sweet rig! Congrats

Dear Board,

I picked her up today. A 1990 Smokercraft 168MG with a 1982 Evinrude 35 rope start on the back.

The only things I plan to add to her in the immediate future are fish scales and slime.

Regards,

Sweet rig! Congrats

Tim Murphy

 

[JGibson]

New to the forum =D>

Here's my boat (My first boat believe it or not, bought yesterday). '92 14' Lowe. '68 20HP Johnson. Not to sure about the trailer but it looks old with those fenders lol.

 

[tnriverluver]

My 3 boats just aquired in the past year or so after a 10 year hiatus from fishing due to back problems (lost sea legs)

First is my little 8ft Baby Basshunter fresh off the truck and out of the box. Haven't done much to it so far other than change out the seats.

Next is my 2011 Tracker 1542 with 2012 20hp Merc 4 stroke. Many mods coming to this one eventually!

Lastly my new to me purchased over the 4th of July 1990 Alumicraft MVangler 16 with 1998 50hp Johnson. Custom camo paint by previous owner who is an autobody repairman by trade!

And my fishing partner!

 

[ckr74]

Dear Board,

I picked her up today. A 1990 Smokercraft 168MG with a 1982 Evinrude 35 rope start on the back.

The only things I plan to add to her in the immediate future are fish scales and slime.

Regards,

Tim Murphy

Doesn't look like it needs much done to it anyway. That's a nice looking ride. Enjoy! 8)

 

[Tim Murphy]

Dear ckr,

Honestly it doesn't need much but I still want to fiddle around with it some. I'd going to add some rod holders for trolling/drifting and maybe upgrade the fuse/switch panel and wiring to something a bit more modern but the boat was well cared for in it's previous life.

I got the old Impulse 2800 depth finder powered up and it appears to be working. I bought a Garmin Echo 200 to put on her and if the Impulse at the helm works I'll be able to mount the Garmin on the trolling motor at the bow and be all high tech!

I went about 4 or 5 years without a boat and it was sort of awful. My fiancee' really likes to fish, so much in fact that after a month with a square stern Grumman sport canoe she decided she'd like a bit more room and creature comforts so I brought this Smokercraft home. We've only had it out once, on the hottest day of the year so far, but we caught fish and had a good time and that's all that matters to me.

Regards,

Tim Murphy

 

[Bailbuster]

 

[crappie]

New to the website/forum

Here is my first boat... picked it up a couple weeks ago.

2001 Mirrocraft 3654 14" Deep Fisherman w/ 87 Mariner 25HP

 

[fender66]

Hey crappie...

That's already a very clean looking boat. Congrats on your new tub and welcome to the TinBoat family.

 

[soggybottom]

My 12' northwood powered by a 97 mercury 8hp

 

[tnriverluver]

That center seat being gone should make that 12 footer a much more usable boat. I like it!!

 

[LilStarr]

] Hello All
Well you asked for it, I am new here and going to post my boat projects!
Wish me luck I am still learning and try hard! One is a 17.5 ft 1987 Bass Tracker
and the other is a 18.5 ft Cobia restoring both of them! You guys are all an inspiration! =D>
Thanks and nice to meet you all!
Pam

 

[fender66]

Hello All Well you asked for it, I am new here and going to post my boat projects!
Wish me luck I am still learning and try hard! One is a 17.5 ft 1987 Bass Tracker
and the other is a 18.5 ft Cobia restoring both of them! You guys are all an inspiration! =D>
Thanks and nice to meet you all!
Pam

Hello Pam and welcome to the TinBoat family. We're happy to have you here.

Looks like you have a couple real good projects ahead of you. Don't forget to take pictures and share any progress or ask any questions you have. There's some real talent with the members of this forum and we are all very happy to help out.

 

[Pan Fisherman]

Just picked this up today:

 

[Aft Backwards]

This is my 14' 1951 Sears Jon w/ 25hp. I have a project fiberglass boat in progress. 16' deep V. Anyone know the manufacturer of this hull? No ID on it anywhere.

 

[Aft Backwards]

This one didn't load on 1st try.

 

[m casey stock]

This is a 1969 orlando clipper that I did a deck mod to ...I will post the whole project when I have time.

Poor Clipper got clipped

 

[trueblue1970]

This is my 14' 1951 Sears Jon w/ 25hp. I have a project fiberglass boat in progress. 16' deep V. Anyone know the manufacturer of this hull? No ID on it anywhere.

Whats up Aft? Im right up the road in Palm Coast. Is that the Tomoka?